Calling Line Identification Restriction (Clir); Temporary Calling Line Identification Restriction; Permanent Calling Line Identification Restriction; Reserving A Line - Siemens Gigaset 4110 Comfort Operating Instructions Manual

Convenient telephoning

Calling line identification restriction (CLIR)

Step
by
If you withhold your number from other parties, you can activate the calling line
step
identification restriction. You can set up CLIR for just the next call or
permanently. If set up permanently your call number will be suppressed both
for outgoing calls (CLIR) and for incoming calls (COLR). This feature must be
supported by your provider.

Temporary calling line identification restriction

Press
1.
Select using [
2.
( in front of Temp.withhold = ON / no = OFF).
Confirm with [OK ].
3.
C
4.
Info

Permanent calling line identification restriction

Press
1.
Select using [
2.
Withhold no.
Confirm with [OK ].
3.

Reserving a line

You cannot make external calls when both external lines are being used by
other internal subscribers. In this case you can "reserve a line". When an
external channel becomes available, the system calls you automatically and you
can make external calls again.
Reserving a line
You attempt to set up an external connection but all external lines are busy.
Press [CALLBCK].
1.

Accepting a free line

An external line becomes available. A recall is implemented.
Lift the handset: Press
1.
A connection is set up to the provider.
Set up the external connection as normal.
2.

Deleting a line reservation

An external line becomes available. A recall is implemented.
Press [DELETE].
1.
The external line reservation is deleted.
58
*
for selection menus.
Z
] and [OK ]:
is pressed.
*
for selection menus.
Z
] and [OK ]:
( in front of Withhold no. = ON / no = OFF)
E
→
Base Settings Call preparat.
→
Base Settings Settings
.
→
Temp.withhold.
→ →
ISDN settings