5.5 Igniting the Kalfire
5.5.1 Igniting the Kalfire W45/48F, W60/51F, W71/62F,
W100/61F and W66/48S
Place a couple of large logs on the base of the appliance and one
large log against the rear wall. Place a smaller log on top. Place
some firelighters on top.
Ignite the firelighters using a long match. Leave the door slightly
open (1-2 cm) for a couple of minutes.
34
Place some finely chopped wood onto the logs. Open the air
regulation completely (position on the extreme right).
When there is a glowing bed, distribute the glowing ashes using
poker. Now add more wood (see section 5.6).