Table of Contents
Advertisement
3.6.1 Rear connection
The Kalfire W is delivered as standard, with the flue exit
connection on the top of the appliance. This connection can
be converted to create a flue exit connection at the rear of the
appliance.
Figure 1 Converting a top flue exit into a rear flue exit (6 steps)
1. Demount the upper part of the convection casing.
2. The connection piece is now visible, and the four bolts can
be unscrewed.
3. Turn the connecting piece 180°.
4. Press the punched cover out of the convection casing; this
cover is used to close off the upper connection.
5. Mount the upper part back onto the appliance.
6. Place the cover on the opening on the top.
7. Continue with the connection of the fireplace.
Attention:
•
Make sure that all the horizontal parts of the rear
connection can be reached for cleaning.
•
The horizontal part may be maximum 50 cm.
21
Advertisement
Table of Contents
