Mounting And Installation; Check Before Building In/Mounting; Kalfire Front And Tunnel Models - Kalfire W Series Installation And User Manual

3 Mounting and installation

Before installing the appliance, check if the load bearing capacity
of the floor is sufficient to bear the weight of the appliance and
the intended surround (see table 5) for a long period of time. If
this is not the case, please take the necessary precautions (e.g.
distributing the pressure points by using a dimensionally stable,
fire resistant sheet).

3.1 Check before building in/mounting

3.1.1 Kalfire front and tunnel models

1. Check immediately upon arrival, if the products supplied
are complete and undamaged. Report any damaged or
missing items to the supplier immediately.
2. Remove the transport security (screws with yellow sticker
on the front of the convection casing).
3. Check the following parts for correct working:
- Lifting door up and down.
- Forward tilting action of door for cleaning.
- Air control.
- Adjustment feet.
- Any damper with control button (accessories).
- Any aeration valves (accessories).
4. Hand the installation/user manual personally to the user of
the fireplace.
5. Test the internal fresh air valve for correct working. This
valve is situated on the rear of the fireplace, behind the
fresh air connection. When the door is closed, the fresh
air flows into the combustion chamber via the air slide
valve. When the door is opened, the fresh air flows into the
combustion chamber via the convection casing and outlet
openings.
13