DATE / TIME & SCHEDULE KEYS (CON'T)
The month can be selected by keying in the numerical
value to select the day. After the month is selected, the
(ENTER) key must be pressed to store the data.
A "0" must be keyed in for months 01-
09. The panel will automatically pro-
vide the abbreviation of the month.
Pressing the ▼ (DOWN ARROW) key again scrolls
to the year:
CLOCK FRI 18-JUN-2005 10:15:33 AM
YEAR
The year can be selected by keying in the numerical
value to select the year. After the year is selected, the
(ENTER) key must be pressed to store the data.
Pressing the ▼ (DOWN ARROW) key again scrolls
to the hour:
CLOCK FRI 18-JUN-2005 10:15:33 AM
HOUR
The hour can be selected by keying in the numerical
value for the hour. After the hour is selected, the
(ENTER) key must be pressed to store the data.
One or two "0's" must be keyed in for
hours 00-09.
Pressing the ▼ (DOWN ARROW) key again scrolls
to the minute:
CLOCK FRI 18-JUN-2004 10:15:33 AM
MINUTE
The minute can be selected by keying in the numerical
value for the hour. After the minute is selected, the
(ENTER) key must be pressed to store the data.
One or two "0's" must be keyed in for
minutes 00-09.
JOHNSON CONTROLS
Pressing the ▼ (DOWN ARROW) key again scrolls
to AM/PM:
AM/PM can be selected by pressing the ◄ or ► (AR-
ROW) keys. After the meridian is selected, the (EN-
TER) key must be pressed to store the data.
Pressing the ▼ (DOWN ARROW) key again scrolls to
the time format selection:
= XXXX
The time format may be displayed in either a 12 hour or
24 hour format. Selection can be changed by pressing
the ◄ or ► (ARROW) keys. The (ENTER) key must
be pressed to store the data.
SCHEDULE Key Operation
The Daily Schedule must be programmed for the unit
start and stop times. To set the schedule, press the
= XX
SCHEDULE key. The display will provide a message
allowing access to 2 types of schedule information:
The schedule types are:
The schedule type (UNIT OPERATING SCHEDULE or
= XX
SOUND LIMIT SCHEDULE) may be changed by press-
ing the ◄ (LEFT ARROW) or ► (RIGHT ARROW)
keys followed by the (ENTER) key. The selection
must be entered by pressing the (ENTER) key before
a schedule display will appear.
CLOCK FRI 18-JUN-2004 10:15:33 AM
AM/PM ◄ ►
CLOCK FRI 18-JUN-2004 10:15:33 AM
TIME FORMAT ◄ ►
SCHEDULE
CHOOSE SCHEDULE TYPE
◄ ►
XXXXXXXXXXXXXXXXXXXXXXXXX
· UNIT OPERATING SCHEDULE
(Default selection)
· SOUND LIMIT SCHEDULE
(Only if Sound Limiting is enabled by the factory
when the option is installed.)
FORM 201.21-NM1 (616)
= XX
= XXXXXXX
8
255