Sherwood Newcastle R-963 Operating Instructions Manual page 25

Continued
When playing some multi-channel program sources in the Extra Surround 6.1/7.1 mode.
When the digital signals from the following program sources only are input in the available decoding mode, if
these buttons are pressed, the corresponding surround mode will be selected.
Dolby Digital 5.1-channel sources(including THX Surround EX created using the Dolby Digital Surround EX
technology) : EXTRA SURROUND mode,
DTS 5.1-channel sources : DTS ES MATRIX mode.
Press the EXTRA SURROUND 6.1/7.1 button on the front panel or the 7.1 CH SURROUND button on the
remote control again to cancel the 6.1(or 7.1) surround mode.
According to whether the surround back speaker is set to "1CH" or "2CH", the 6.1 or 7.1 mode is selected.
However, when the surround back speaker is set to "None", the Extra Surround 6.1/7.1 mode cannot be activated.
When canceling the surround mode for normal stereo operation.
Then the stereo mode is selected.
To cancel the stereo mode, select the desired surround mode with using the MULTI CONTROL knob or the DSP
MODE button, etc.
POWER
OSD
OFF
EXTRA SURR.
MAIN
CH/
SET
or
VOL CH
6.1/7.1
MUTE
AUTO DSP
7.1
SURR
RETURN
STEREO
1 3
2
4 6
5
7 9
8
DISC ROOM 2
DISP 0 ENT
MI M2 M3
RNC-500
OSD
OFF
STEREO
VOL
or
AUTO
RETURN
STEREO
1
4
7
DISC
DISP
MI
25
7.1
SURR
POWER
MAIN
CH/
SET
CH
MUTE
DSP
7.1
SURR
STEREO
3
2
6
5
9
8
ROOM 2
0 ENT
M2 M3
RNC-500