Digital Phone
9.4.2 8019s DeskPhone
1. Drill two holes on the wall
(separation=90mm, diameter=6mm).
2. Insert the fastener into the holes on wall
(P/N: 1AD007550003).
3. Fix the support with both screws and
adjust (P/N: 1 1AD007460003). The
support is used as a reference and must
be removeable.
1. Fix the support with the phone by 1
screw (P/N: 1AD204430001).
2. Connect cables through the hole on
support bottom side.
8AL90353USABed01
1. Put the support on the back side of the
phone.
2. Slide it from top side and make sure the 2
snaps are engaged on the shell.
1. Hang the assembled phone with support on
the wall (P/N: 1AB045210162).
66 /73