Use Personal Photos As Screen Savers - Polycom VVX 201 User Manual

3. Select Wait Time and enter the number of minutes the phone can wait after no activity before
displaying the screen saver.
You can enter any time between one and 9999 minutes. The default time is 15 minutes.
4. Select Type and select either Default or Idle Browser.
5. Press Save.

Use Personal Photos as Screen Savers

On VVX 401/411, 500/501, and 600/601 phones, you can enable your phone to display your personal
photos as a screen saver. To set up a screen saver of your pictures, you need to set up certain screen
saver settings, place your pictures on a USB flash drive, and attach the USB flash drive to the phone.
The pictures you use must have the following file type and size properties:
• File type: BMP, JPEG, or PNG
• Maximum size: 9999 x 9999 pixels
The phone can only display the photos as your screen saver when the USB flash drive is attached to the
phone.
You can set up your phone to use a single picture to display or have all pictures display in slide-show
style. This is an alternative to setting up a screen saver, and it automatically starts each time your phone
is idle a certain amount of time.
Procedure
1. Place one or more pictures on a USB flash drive, either in the root directory or in a folder.
2. Attach the USB flash drive to your phone.
The USB icon
3. Navigate to Settings > Basic > Preferences > Picture Frame.
4. From the Picture Frame screen, select Folder, and enter the name of the folder you placed your
images in on the USB flash drive.
If you did not place the pictures in a folder, but placed them in the root directory instead, do not
enter a folder name.
5. Select Time Per Image, and enter the number of seconds you want each picture to display.
You can enter a minimum of 3 seconds and a maximum of 300 seconds. The default is 5 seconds.
6. Select Save.
If the message "No pictures found" displays after you select Save, there are no pictures in the
folder you specified or in the root directory. Go back and make sure the information you entered is
correct.
7. Navigate to Settings > Basic > Preferences > Screen Saver.
8. From the Screen Saver screen, select Screen Saver, and select Enabled.
9. Select Wait Time, and enter the number of minutes the phone should wait, after no activity, before
displaying the screen saver.
You can enter any time between one minute and of 9999 minutes. The default is 15 minutes.
10. Select Save.
Polycom, Inc.
is displayed on the status bar.
VVX Business Media Phone Settings
47