Table of Contents
Advertisement
AR-PB8
4) Press the Left or Right arrow key to change the setting.
•
The current value is marked with an asterisk ( ).
DATA
LINE
MENU
ITEM
5) After choosing the required value, press the ENTER key.
•
The new value is registered.
DATA
NE
MENU
ITEM
A. Main Menu
Possible
Item
Settings
Copies
1
999
Sets how many copies to print.
600dpi
Resolution
Sets the printing resolution.
300dpi
Sets whether smoothing is done or not.
This function improves the appearance
of printed documents by smoothing the
angles and curves of images. This
allows printing at a higher apparent
On
Smoothing
resolution. For example, if the printer is
Off
set to 600dpi, resolution equivalent to
1200dpi can be achieved.
When printing image data, you may
need to select "Off" to achieve best
results.
Sets whether toner save mode is in
effect or not. This function prints slightly
On
Toner Save
fainter to save toner. This item is
Off
different from the copier "toner save
mode".
Sets page protection. Page protection is
a function designed to prevent data loss
Page
On
errors when complex data is printed.
Protection
Off
This menu item is displayed only if the
installed printer memory is 24MB or
more.
2-Sided
On
Setting of duplex function and binding
Printing B
Off
direction.
Sets the tray used for paper feeding.
Auto
Setting to "Auto" automatically selects
Tray 1
the paper tray loaded with the paper of
Paper
Tray 2
the size specified in the "Paper Size"
Source
Tray 3
item.
Tray 4
The available settings reflect the
Bypass Tray
installed trays.
ENTER
ENTER
Description
4 – 2
Possible
Item
Settings
A3
B4
A4
B5
Sets the size of the paper where data
A5
will be printed. If this size is different
Ledger
from the paper size present in the tray,
Legal
the size set on the operation panel takes
Paper Size
Letter
precedence.
Executive
Depending on where the printer was
Folio
purchased, the default value is either A4
Invoice
or Letter.
Foolscap
COM-10
DL
C5
Sets the page orientation for printing.
Specify "Portrait" to print the paper with
Portrait
its long side (longer edge) vertical.
Orientation
Landscape
Specify "Landscape" to print the paper
with its long side (longer edge)
horizontal.
Auto
Emulation
PCL
Specifies the printer language used.
HEX
B. Network Menu
Item
Setting Choice
Set IP Address
Set Subnet Mask
Set Default Gateway
YES
Enable TCP/IP
YES
Enable Netware
YES
Enable EtherTalk
YES
Reset to Defaults
Displayed only if the optional Network Interface Control card is
installed.
C. Interface Menu
Item
Setting Choice
1 second
I/O Time Out
60 second
999 second
D. Test Menu
Item
Configuration Page
PCL6 Font List
PS2 Font List 1, A
1 Displayed only when the PS Kit (AR-PS1) is installed.
E. PS2 Menu A
Item
Print PS2 Error
When set to "On", PS error print is made.
Displayed only when the PS Kit (AR-PS1) is installed.
Description
Description
Yes
Sets the IP address.
No
Yes
Sets the subnet
No
mask.
Yes
Sets the default
No
gateway.
Enable/Disable
NO
TCP/IP
Enable/Disable
NO
Netware
Enable/Disable
NO
EtherTalk
Reset Print Server
NO
Card to default.
Description
Sets I/O time-out. If
:
no data is received
within the preset
:
time, print
processing is ended.
Description
Prints the configuration page.
Prints the PCL6 font list.
Prints the PS2 font list.
Description
Advertisement
Table of Contents
