Installing Onto Windows 98 - Sharp AR-PB8 User Manual

AR-PB8
6) Print a test page by clicking the [Finish] button.
Note: If you check "No" and click the [Finish] button, the printer
does not print a test page after the installation.
•
The printer driver installation begins.
•
If the "Insert Disk" window appears, perform the following
steps:
<1> Click the [OK] button.
<2> When the "Copying
R:\English\WinXX and click the [OK] button.
7) When the test page is printed properly, click the [Yes] button.
•
The printer is ready for printing.
B. Installing onto Windows 98
This printer is compatible with plug & play. If your computer is incom-
patible with plug & play or if you want to use this printer as a network
printer, refer to "Installing onto Windows 95/98 without Using the Plug
& Play Function".
1) Turn the computer on and start Windows 98.
•
The "Add New Hardware Wizard" window appears automat-
ically, click the [Next] button.
Note: If the "Add New Hardware Wizard" window does not ap-
pear in this step, refer to "Installing onto Windows 95/98
without Using the Plug& Play Function".
2) Display a list of all the printer drivers by checking "Display a list of
all the drivers in a specific location, ..." and clicking the [Next]
button.
Files" window appears, type
3) Click the [Have Disk...] button.
4) Insert the SHARP Software CD-ROM into the CD-ROM drive, type
R:\English\WinXX, and click the [OK] button.
5) Choose the appropriate printer driver from those listed below and
click the [Next] button.
•
PCL6 Printer Driver:
•
PCL5e Printer Driver: SHARP AR-160/200 Series PCL5e
Note: It is recommended that you install the PCL6 printer driver.
If you have a problem printing from older software using
the PCL6 driver,remove it and install the PCL5e driver.
6) After Windows finds the printer driver, click the [Next] button to
continue the installation.
7) Print a test page by clicking the [Finish] button.
Note: If you check "No" and click the [Finish] button, the printer
does not print a test page after the installation.
•
The printer driver installation begins.
8) When the test page is printed properly, click the [Yes] button.
•
The printer is ready for printing.
3 – 5
SHARP AR-160/200 Series PCL6