Sharp XG-PH70X-N Operation Manual page 45

H & V KEYSTONE
1
Press on the projector or
on the remote control re-
peatedly until "H & V KEY-
STONE" is displayed.
• When the correction has already been
made with "GEOMETRIC ADJUST-
MENT", the confirmation message for
resetting the correction before "H & V
KEYSTONE" is displayed, and then re-
set.
2
Press ' or " to parallelize the
left and right sides of the pro-
jected image.
3
Press \ or | to parallelize the
upper and lower sides of the
projected image.
4
Press or
AGE RESIZING".
• Only when "H & V KEYSTONE" is set
to the values other than "0", "IMAGE
RESIZING" works.
to display "IM-
▼On-screen Display
Vertical Keystone Correction
(Adjustment with
Horizontal Keystone Correction
(Adjustment with
▼On-screen Display
' / "
)
\ / |
)
-43