Service Mode - Sharp XG-PH70X-N Operation Manual

Helpful Functions Set during Installation ("Options (2)" menu)
4
Enter "Gateway" using '
\, then press
Description of TCP/IP
Selectable items
IP Address Factory default setting:
192.168.150.002
Enter an IP address appropriate for the
network.
Subnet Mask Factory default setting:
255.255.255.000
Set the subnet mask to the same as that
of the computer and equipment on the
network.
Gateway Factory default setting:
000. 000. 000. 000
* When not in use, set to:
"000. 000. 000. 000".
Note
• Before setting "TCP/IP", select "OFF" for "DHCP
Client".
• Confirm the existing network's segment (IP ad-
dress group) to avoid setting an IP address that
duplicates the IP addresses of other network
equipment or computers. If "192.168.150.002"
is not used in a network with an IP address of
"192.168.150.XXX", you don't have to change
the projector IP address.
• For details about each setting, consult your net-
work administrator.
-90
' ' , " ' ' " " , | | | | | and " "
.
Description

Service Mode

Only the service centers use the menu. Do not
use the menu.
Example: "Options (2)" screen menu