Connecting With A Dvi Digital Cable - Sharp XG-PH70X-N Operation Manual

Connecting with a DVI Digital Cable

The projector employs the DVI digital input terminal for direct input of digital video signals
from a computer.
Computer
To audio output
terminal
Note
• When connecting the projector to a computer in this way, select "D. PC RGB" for "Signal Type" in the
"Picture" menu.
• When using the ø3.5 mm mono audio cable, the volume level will be half of when using the ø3.5 mm
stereo audio cable.
Side view
To INPUT 3 terminal
To DVI digital
output terminal
DVI Digital cable
(commercially available)
ø3.5 mm stereo or mono audio cable
(commercially available or available as
Sharp service part QCNWGA038WJPZ)
To AUDIO input
(2, 3) terminal
-29