Table of Contents
Advertisement
4.
Adjust the angle
Adjust the projector angle
• • • • • Shift the lens horizontally and vertically.
1 1 1 1 1 Press
on the projector or
remote control.
2 2 2 2 2 Press ', ", \ or | on the projector or the
remote control.
5.
Adjust the focus and the zoom
1 1 1 1 1 Press
on the projector or
2 2 2 2 2 Press
on the projector or
6.
Correcting the image distortion due to the projection angle
1 1 1 1 1 Press
on the projector or
remote control.
2 2 2 2 2 Press
on the projector or
remote control.
3 3 3 3 3 Press ', ", \ or | to move the position for
the upper left of the image.
7.
Select the input mode
Press
on the projector or
remote control to select the "INPUT 1" mode.
• • • • • When pressing
Pressing
on the projector switches between "INPUT 4" and "INPUT 5".
• • • • • When using the remote control, press
8.
Turn the power off
Press
on the projector or
press
or
again.
• • • • • You can unplug the power cord even if the projector is operating.
• • • • • Even if you unplug the power cord from the AC outlet, the cooling fan continues to run for a while.
on the
on the remote control to adjust the focus.
on the remote control to adjust the zoom.
on the
on the
on the
" " On-screen Display (RGB)
" "
"
on the projector, input mode switches in order of :
/
on the remote control. While the confirmation message is displayed,
" " On-screen Display
" "
"
• • • • • Adjust the projector angle by rotating the adjust-
ment feet.
4 4 4 4 4 Press
or
5 5 5 5 5 Repeat the same procedure with the positions
for the upper right, lower right and lower left of
the image.
• • • • • When the position of the lower left is set, the
correction is made and the display disappears.
/
/
/
to switch the input mode.
Pages 38, 39
Page 40
to set the position.
Page 41
INPUT 1
INPUT 2
INPUT 3
Page 45
Page 37
.
-21
Advertisement
Table of Contents
