Using The Remote Control As A Wireless Compu- Ter Mouse - Sharp XG-PH70X-N Operation Manual

Using the Remote Control as a Wireless Computer Mouse
When connecting the supplied remote
mouse receiver to the computer, you can use
the remote control as the wireless computer
mouse.
1
Connect the supplied remote
mouse receiver to the USB termi-
nal on the computer.
2
Slide the ADJ./MOUSE
switch on the remote con-
trol to the MOUSE position.
3
Use the mouse function.
• Point the remote control at the remote
mouse receiver.
■ When moving the cursor
Press '/"/\/|.
■ When left-clicking
Press .
■ When right-clicking
Press .
■ When your computer supports only a
one-click mouse (such as Macintosh
Press or . (
mon function.)
Note
• This function only works with the Microsoft
®
Windows OS and Mac OS
tion does not work with the following operation
systems that do not support USB.
Versions earlier than Windows
•
Versions earlier than Windows
•
Versions earlier than Mac OS
•
• Confirm that the computer recognizes the USB
connection.
• While the remote control is connected to the
projector with a signal cable, you cannot use
the wireless computer mouse function.
ADJ.
MOUSE
® )
and have com-
®
®
. However, this func-
® 95.
®
NT4.0.
®
8.5.
Supplied
accessory
Computer Remote mouse receiver
To USB terminal
ADJ./MOUSE switch
Mouse/adjustment button ('/"/\/|)
R-click button
L-click button
Remote mouse
receiver
-19