Replacing The Air Filter; Cleaning And Replacing The Air Filter - Sharp Notevision PG-A10S Operation Manual

Sharp operation manual lcd projector pg-a10x, pg-a10s
Hide thumbs Also See for Notevision PG-A10S:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Replacing the Air Filter

• This projector is equipped with air fil-
ters to ensure the optimal operating
condition of the projector.
• The air filters should be cleaned every
100 hours of use. Clean the filters more
often when the projector is used in a
dusty or smoky location.
• Ask your nearest Sharp Authorized Pro-
jector Dealer or Service Center to ex-
change the filter (PFILDA008WJZZ)
when it is no longer possible to clean.
Cleaning and Replacing
the Air Filter
1
Turn off the power and discon-
nect the power cord.
• Press
on the remote control. Wait until the cool-
ing fan stops.
2
Remove the filter/lamp unit
cover.
• Turn the projector over. Loosen the user
service screw (1) that secures the fil-
ter/lamp unit cover. Pressing the tab
(2), remove the filter/lamp unit cover
(3).
3
Remove the air filter.
• Pick the air filter up with your fingers and
lift it out of the filter/lamp unit cover.
A10X_A10S#E_Print#p51_62.p65
on the projector or
53
" " Bottom view
" "
"
" " Rear view
" "
"
Air filter
Air filter
(not removable)
Power OFF button
1
3
Tab
2
03.2.4, 2:07 PM
Air filter
(not removable)
Power
OFF
button
User service screw
53

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pg-a10s-slNotevision pg-a10x

Table of Contents