Sharp Notevision PG-A10S Operation Manual page 58

Replacing the Air Filter
4
Clean the air filter.
• Clean the dust off the air filter and cover
with a vacuum cleaner extension hose.
5
Replace the air filter.
• Place the air filter underneath the tabs
on the filter/lamp unit cover.
6
Replace the filter/lamp unit
cover.
• Align the tab on the filter/lamp unit cover
(1) and place it while pressing the tab
(2) to close it. Then tighten the user
service screw (3) to secure the filter/
lamp unit cover.
Note
• Be sure the filter/lamp unit cover is securely
installed. The power will not turn on unless
it is correctly installed.
• If dust or dirt has collected inside the rear
and bottom air filters (not removable), clean
the filter with a vacuum cleaner extension
hose.
54
A10X_A10S#E_Print#p51_62.p65 54
1
2
Tab
User service screw
03.2.4, 2:07 PM
3