Sharp Notevision PG-A20X Specification Sheet

PG-A20X

Optional Accessories

Remote Receiver Cables
AN-C3CP
AN-MR1EL 3-RCA to 15-pin
D-sub cable (3 m)
AN-C10BM
Computer RGB cable
15-pin mini D-sub
male connector (10 m)
Replacement Parts:
Lamp unit

Specifications

Model
LCD panel
Panel size
Drive system
No. of pixels
Lens 1:1.2 manual zoom and focus, F1.7-1.94, f=26-31mm
Projection lamp
Luminance
Contrast ratio
Luminance ratio
Lamp life
Fan noise 33 dB (Eco mode)/37 dB (Standard mode)
Audio output
Speakers
Power source
Power consumption 240W (Standard mode)/200W (Eco mode) with 110V AC
235W (Standard mode)/195W (Eco mode) with 240V AC
Power consumption (standby)
Heat dissipation
750 BTU/hour (Eco mode) with AC 110V
Operating temperature
Storage temperature
Video colour signals
RGB input signals
15-70 kHz (horizontal), 43-85 Hz (vertical), 12-108 MHz (pixel clock) (plug & play VESA, DDC 1/28)
Input terminals
Computer input signals
Video input signals
Other
Cabinet
Dimensions
Weight
Supplied accessories
Design and specifications are current as of September 2003, but are subject to change without prior notice.
SHARP CORPORATION
OSAKA, JAPAN
U R L h t t p : / / w w w . s h a r p - w o r l d . c o m /
[White]
PG-A10X/S
AN-C3BN
5-BNC to 15-pin
D-sub cable (3 m)
AN-C10RS
RS-232C serial
control cable (10 m)
BQC-PGA20X//1 (PG-A20X), BQC-PGA10X//1 (PG-A10X/S)
PG-A20X
2,359,296 pixels (786,432 dots x 3)
180W (SHP) lamp
2,000 ANSI lumen (Standard mode)/
1,600 ANSI lumen (Eco mode)
400:1
90%
110-240V AC, 50/60 Hz (multi-voltage)
4W (110V AC) – 6W (240V AC)
900 BTU/hour (Standard mode)/
880 BTU/hour (Standard mode)/
730 BTU/hour (Eco mode) with AC240V
NTSC/NTSC 4.43/PAL/PAL(60Hz)/PAL-M/PAL-N/SECAM/DTV (480I/480P/540P/580I/580P/720P/1035I/1080I-50Hz/60Hz)
SXGA+/SXGA/Mac 21" (in intelligent compression), XGA, SVGA, VGA, VESA, Mac 19"/16"/13",
Computer RGB/component x 1(15-pin mini D-sub), audio L/R x 1 (3.5 mm mini jack)
Remote control, R-6 battery (x2), power cord, RGB cable, carrying case, lens cap, extra air filter,
projector manual and technical reference CD-ROM, "QUICK GUIDE" label, operation manual
Ceiling
Mounts
PG-A10X/A10X
-SL
Poly Silicon 0.79" (2.0cm)
Active Matrix TFT
1:1.2 manual zoom and focus, F1.9-2.2, f=26-31mm
1,300 ANSI lumen (Standard mode)/
1,040 ANSI lumen (Eco mode)
450:1
4,500 hours (Eco mode)/3,000 hours (Standard mode)
31dB (Eco mode)/35dB (Standard mode)
1W (mono)
2.8 cm (round) x 1
100-240V AC, 50/60 Hz (multi-voltage)
240W (Standard mode)/190W (Eco mode) with 100V AC
226W (Standard mode)/182W (Eco mode) with 240V AC
5W (100V AC) – 8W (240V AC)
900 BTU/hour (Standard mode)/710 BTU/hour (Eco mode) with AC 100V
850 BTU/hour (Standard mode)/680 BTU/hour (Eco mode) with AC240V
+5 C to +35 C
-20 C to +60 C
Video x 1 (RCA), S-video x 1
RS-232C serial port x 1 (9-pin mini Din)
Plastic
297 x 81 x 229 mm (main body only)
297 x 89 x 229 mm (including adjuster and projecting parts)
2.9 kg
1N0084N © SHARP CORP. (JAN. 2004 PRINT) I 1 E Printed in Japan
[Silver]
PG-A10X / PG-A10S
-SL -SL
AN-TK201
For high ceiling
installation
PG-A10S/A10S
1,440,000 pixels (480,000 dots x 3)
165W (SHP) lamp
1,500 ANSI lumen (Standard mode)/
1,200 ANSI lumen (Eco mode)
400:1
95%
SXGA+/SXGA/XGA/Mac 21"/
19"/16" (in intelligent compression), SVGA, VGA,
VESA, Mac 13", 15-70 kHz (Horizontal),
43-85 Hz (Vertical), 12-108 MHz (Pixel clock)
(plug & play VESA, DDC 1/28)
Pixelworks ICs are used in this projector.
AN-TK202
For standard
ceiling installation
AN-A10T
Installation adaptor
-SL