Video System (Setting The Video System); Background (Selecting A Startup And Background Image); Eco Mode (Setting The Eco Mode) - Sharp Notevision PG-A10S Operation Manual

Video System
Video System)
The video input system mode is preset to "Auto";
however, a clear picture from the connected audio-
visual equipment may not be received, depending
on the video signal difference. In that case, switch
the video signal.
Select "Video System" on the "Options" menu
and the appropriate video system.
Description of Video Systems
Selectable settings
When connected to PAL video
PAL
equipment.
When connected to SECAM video
SECAM
equipment.
When reproducing NTSC signals in
NTSC4.43
PAL video equipment.
When connected to NTSC video
NTSC3.58
equipment.
Note
• The video signal can only be set in INPUT 2 or
INPUT 3 mode.
• In "Auto", images are displayed in PAL even if
PAL-N or PAL-M input signals are received.
A10X_A10S#E_Print#p40_50.p65
(Setting the
Description
45
Background
Startup and Background Image)
Select "Background" on the "Options" menu
and the image displayed upon the projector's
startup and when no signal is being sent to
the projector.
Sharp
Blue
None
Description of Background Images
Selectable settings Description
Sharp SHARP default image
Blue Blue screen
None
Black screen
Note
• If the input signal has interference, the screen
will be displayed during interference.
Eco Mode
(Setting the Eco
Mode)
Select " " (Eco Mode) or "
Mode) in "Eco Mode" on the "Options" menu.
Description of Eco Mode
Power consumption
Selectable settings Brightness
(When using AC 100V)
80% 190 W
(Eco mode)
100% 240 W
(Standard mode)
Note
• Although lamp life and noise are improved when
"Eco Mode" is set to "
ness decreases by 20%.
• "Eco Mode" mode is factory preset to "
(Standard mode).
03.2.4, 2:06 PM
(Selecting a
" (Standard
Lamp life
4,500 hours
3,000 hours
" (Eco mode), bright-
"
45