Setting the Video System
The video input system mode is preset to "Auto"; however, a clear picture from the con-
nected audio-visual equipment may not be received, depending on the video signal differ-
ence. In that case, switch the video signal.
Setting the Video
System
Select "Video System" in the "Options"
menu on the menu screen.
➝For operating the menu screen, see
pages 42 to 45.
Note
• The video signal can only be set in IN-
PUT 3 or INPUT 4 mode.
• In "Auto", images are displayed in PAL
even if PAL-N or PAL-M input signals are
received.
Setting a Background Image
This function allows you to select the image displayed when no signal is being sent to the projector.
Selecting a
Background Image
Select "Background" in the "Options"
menu on the menu screen.
➝For operating the menu screen, see
pages 42 to 45.
Selected Item
Blue
None
* If the input signal has interference, the screen
will be displayed with the interference.
-70
Downloaded from ProjectorsManual.com Manuals
Description
Blue screen
Black screen
*
PAL
When connected to PAL video equipment.
SECAM
When connected to SECAM video
equipment.
NTSC4.43
When reproducing NTSC signals in
PAL video equipment.
NTSC3.58
When connected to NTSC video equipment.