General Setup Menu - Sony IPELA PCS-HG90 Operating Instructions Manual

Aspect Ratio for S-VIDEO Input
Allows you to select the aspect ratio for S-
VIDEO video input signal: "4:3" or "16:9".

General Setup Menu

The following menus appear when you
select "General" on the Setup menu. Select
the desired menu.
General Setup
Back Device Setup
Clock Set
Camera
Menu Screens
Memory Stick
Launcher Screen
Setup
Device Setup
General Setup
Device Setup
1/1
Page:
Terminal Name
Language
Last Number Registration
Control by Far End
Standby Mode
Standby Time
Terminal Name
Input the terminal name transmitted to
remote parties (up to 30 characters).
Language
Allows you to select the menu and display
language used by the system. You can select
English, French, German, Japanese,
Spanish, Italian, Simplified Chinese,
Portuguese, Traditional Chinese, Korean, or
Russian.
Last Number Registration
Allows you to select whether to register the
remote party in the Phone Book after the
communication ends.
On: If the remote party is not registered in
the Phone Book, the "Register this
participant in the list?" message appears
on the monitor screen when the
communication ends. When you select
"OK", the List Edit menu opens.
2005.12.28 12:34
Previous
2005.12.28 12:34
PCS-HG
English
On
On
Off
minutes
Save Cancel
Off: The message above does not appear and
remote party registration does not take
place.
Control by Far End
When "Far End Camera Control" is set to
"On" in the Communication Mode menu,
you can temporarily reject the camera
control command transmitted by the remote
party.
On: Accepts the camera control command.
Off: Rejects the camera control command.
Standby Mode
Allows you to select whether the
Communication Terminal enters standby
mode if idle for a specified period of time.
On: Allows the system to go on standby.
Off: Does not allow the system to go on
standby.
Standby Time
Specify the time the system must remain idle
before entering the standby mode. This time
can be set up to 99 minutes.
For details on the standby mode, see
"Standby Mode Function" on page 26.
Clock Set
General Setup
Clock Set
Page: 1/1
NTP
Primary NTP Server
Secondary NTP Server
Time Zone
Clock Display Pattern
Clock Set
Time Update
NTP
Select ON when you want to get the time
information from the server by NTP.
On: Gets the time information from the
server.
Off: Does not get the time information from
the server.
Primary NPT Server
Allows you to input the address of the
Primary NTP server that gets the time
information.
Registering Local Information
2005.12.28 12:34
Off
. . .
. . .
GMT= 0
Year/Month/Day
: :
Save Cancel
47