Monitoring The Local Picture As A Window Picture - Pinp Feature - Sony IPELA PCS-HG90 Operating Instructions Manual

Monitoring the Local Picture as a
Window Picture – PinP Feature
You can display the picture shot by the local camera on your monitor screen
as a window picture (Picture-in-Picture). This function enables you to check
how your own party is monitored on the remote site.
To display the window picture
Press the PinP button on the Remote Commander.
The local picture is displayed as a window picture.
Notes
• The window picture is not available while not in PandP mode or Side by Side mode.
• The window picture is not available while not in communication with a remote party.
To change the location of the window picture
Each press of the PinP button changes the location of the window as follows
:
The window picture
disappears.
Note
The window picture is displayed in the same location as it was last located. The window
picture does not appear if it was not previously displayed.
Monitoring the Local Picture as a Window Picture – PinP Feature
Local picture
Remote picture
Monitor screen
105