General Setup Menu - Sony PCS-1 Operating Instructions Manual

Dial Tone
Selects whether or not to output a ring-back
tone and busy tone when you are dialing.
On: Outputs the dial tone.
Off: Does not output the dial tone.
Ringer Tone
Selects whether or not to output a ringer tone
when you receive a call.
On: Outputs the ringer tone.
Off: Does not output the ringer tone.

General Setup Menu

Page 1/4
General Setup
Page: 1/4
Terminal Name
PCS-1
Dual Monitor
Monitor Out
Standby Mode
Standby Time
Time Display
Terminal Name
Input the terminal name to report when the
system is connected to the external
multipoint videoconferencing system.
Dual Monitor
When two monitors are connected to the
System, selects whether you use the dual
monitor mode.
On: Enables the dual monitor mode. Still
images are always displayed on the
second monitor.
Off: Disables the dual monitor mode. Still
images are always displayed on the first
monitor.
For details on the dual monitor mode, see
"Using Two Monitors – Dual Monitor" on
page 111.
Monitor Out (or Sub Monitor Out)
Selects the output connected to the monitor
to which the signal is output.
This item changes to "Sub Monitor Out" if
"Dual Monitor" is set to "On", and selects
the output connected to the sub-monitor
(second monitor) to which the signal is
output.
RGB OUT: Outputs from the RGB OUT
connector on the Communication
Terminal.
RGB OUT (DSB): Outputs from the RGB
OUT connector on the Data Solution
Box.
VIDEO OUT: Outputs from the VIDEO
OUT MONITOR MAIN or SUB
connector.
For details, see "Displaying the Picture on
a Projector or Monitor" on page 136.
Registering Local Information
ISDN
Off
VIDEO OUT
On
30 minutes
On
Save Cancel
47