Introduction / Getting Started - Mackie DRM212 Owner's Manual

Introduction
DRM Series Professional Powered Loudspeakers deliver
class-leading power via ultra-efficient Class-D amplifiers
with next-gen protection and Power Factor Correction
technology for peak performance when you need it.
Advanced Impulse™ DSP provides acoustic correction
and time-alignment via precision tuned FIR filters for crystal
clear, punchy sound typically experienced only with massive
touring systems. The DRM Control Dashboard™ features
a high-contrast, full-color display on the back panel for quick
and easy setup.
Custom transducers housed in touring-grade plywood
cabinets are designed for consistent performance
in the most demanding applications.
Equipped with M10 flypoints, dual angle pole mounts,
and available line array configurations – the DRM Series is
perfect for clubs, houses of worship, rental systems
and more.
How to Use This Manual:
After this introduction, a getting started guide will help
you get things set up fast. The hookup diagrams show some
typical DRM loudspeaker setups, including some that involve
the DRM18S subwoofer.
This icon marks information that is critically
important or unique! For your own good, read and
remember them...it is a good idea to pay special
attention to these areas in the Owner's Manual
marked with the "VERY IMPORTANT" hand icon.
There's an illustration of a microscope,
so, of course, you're going to get more
detailed information when you see this little
guy. There are explanations of features
and practical tips listed here.
It's a good idea to pay attention to text displayed
next to a note icon, as this icon draws attention
to certain features and functions relating to the
usage of the DRM Series.
Please write the serial numbers here for future reference
(i.e., insurance claims, tech support, return authorization,
make dad proud, etc.)
Purchased at:
Date of purchase:
4
DRM Professional Powered Loudspeaker Series
Getting Started
The following steps will help you set up the loudspeakers
quickly.
1. Make all initial connections with the power switches OFF
on all equipment. Make sure the master volume, level and gain
controls are all the way down.
2. If not using a subwoofer, connect the outputs from
the mixing console (or other signal source) to the inputs
on the rear panel of the loudspeakers.
3. If using a subwoofer, connect the outputs from
the mixing console (or other signal source) to the inputs
on the subwoofer, then connect the high pass outputs
from the subwoofer to the inputs of the loudspeakers.
4. Push the line cord securely into the subwoofer's /
loudspeaker's IEC connectors and plug the other ends into
grounded AC outlets. The subwoofer/loudspeaker may accept
the appropriate voltage as indicated near the IEC connector.
5. Turn the mixer (or other signal source) on.
6. Turn the subwoofer on (if applicable).
7. Turn the loudspeakers on.
8. Make sure the loudspeaker's channel levels are set
to (or near) 0 dB.
9. Start the signal source and raise the mixer's main L/R
fader up to a comfortably loud listening level.
Things to Remember:
• Never listen to loud music for prolonged periods. Please see
the Safety Instructions on page 2 for information on hearing
protection.
• As a general guide, the mixer (or other signal source) should
be turned on first, subwoofers next, and DRM loudspeakers
last. As such, the DRM loudspeakers should also be turned
off first, followed by the subwoofers, then the mixer. This will
reduce the possibility of any turn-on or turn-off thumps
and other noises generated by any upstream equipment
from coming out of the speakers.
• Save the shipping boxes and packing materials! You may
need them someday. Besides, the cats will love playing
in them and jumping out at you unexpectedly. Remember
to pretend like you are surprised!
• Save your sales receipt in a safe place.