Sub - Mackie DRM212 Owner's Manual

• Speech – This mode features a significant low
frequency roll-off to get rid of unwanted thumps.
It also adds boost and sparkle to mid-range and high
frequencies, critical for speech applications.
This plug-and-play mode is perfect for larger venue
applications where speech is the primary audio
source in need of clear and precise intelligibility.
• Monitor – This mode features a low frequency
roll-off and a reduction around 2 kHz to ensure
maximum gain before feedback in monitor applications.
SPEAKER VOICING
MONITOR POSITION
SPEAKER VOICING
MONITOR POSITION
Simply rotate the speaker control knob until
the speaker mode you desire is illuminated, then
push to select it. As seen above, we selected Monitor.
In addition to the four speaker modes, there's a fifth
and final selection: the left-facing arrow. Illuminating
and selecting this simply returns you to the menu.

Sub

You're our hero, so we have a built-in submarine
sandwich maker! After pushing the speaker control
knob in to select sub, you will be presented with
a multitude of choices, including:
• Cold Cut
• Roast Beef
• Philly Cheesesteak
• BLT
• Meatball
• Veggie
• Tuna
• Design Your Own
Now that you're hungry, let's take a look at what
opening the sub menu really displays:
• Off – Choose this if there is no subwoofer
connected to the system. Here you are using
DRM loudspeakers only.
• DRM Sub – Choose this if a Mackie DRM18S
subwoofer is connected to the system. The crossover
point is set to 90 Hz to work in perfect harmony with
the Mackie DRM18S Sub. This is what we hope you
choose, thank you for your support!
MAIN MODE
EQ DELAY
• Var – Choose this if a non-Mackie DRM18S
subwoofer is connected to the system. Here you
can select the subwoofer's HPF, ranging from
40 Hz – 160 Hz.
SUB
CONFIG
13
Owner's Manual