Getting Started; Things To Remember - Mackie FreePlay HOME Owner's Manual

Getting Started

The following steps will help you set up the FreePlay GO
and FreePlay HOME quickly.
1. Make all initial connections with the power switch OFF.
2. Plug signal sources into FreePlay, such as:
• Line-level sources such as an MP3 player plugged
into the aux input.
3. FreePlay GO – Attach the USB-A connector end
of the included cable to the power supply adapter.
Attach the micro-USB connector to the FreePlay GO
and plug the other end into a grounded AC outlet.
FreePlay HOME – Attach the AC connector to the power
supply adapter by sliding the spring switch down. Line
up the top corners (square) and bottom corners (round)
and insert top side first. Release the spring switch to
latch. Connect the power supply adapter to the FreePlay
HOME and plug the other end into a grounded AC outlet.
4. Turn FreePlay on. A startup sound and LEDs will confirm
that the unit is powered.
5. Pair and connect a smart phone or tablet via Bluetooth.
6. Be sure that the volume of the input is the same as it
would be during normal use.
7. Slowly bring up the main output level to a comfortable
listening level.
4
FreePlay GO • FreePlay HOME

Things to Remember

• Never listen to loud music for prolonged periods.
Please see the Safety Instructions on page 2 for
information on hearing protection.
• Save the shipping boxes and packing materials!
You may need them someday. Besides, your cat – if you
have a small one! – will love playing in them and jumping
out at you unexpectedly. Remember to pretend like you
are surprised!
• Save your sales receipt in a safe place.