Power Control For Pc Source - Sharp Aquos LC-30HV4U Operation Manual

Basic adjustment settings

Power control for PC source

Power control setting allows you to save energy.
MENU TV/SAT/DVD
RETURN MENU
SOURCE
POWER
SET/
ENTER
FAVORITE CH
A B
POWER INPUT
RECEIVER
Power save
1
Press MENU and the PC MENU screen
displays.
2
Press c/d to select "Power control".
3
Press a/b to select "Power Save", and then
press SET/ENTER.
PC MENU
Power control
Power Save
Power Management
4
Press a/b to select the desired backlight
brightness, and then press SET/ENTER.
TV MENU
Power control
Power Save
Selected item
The screen darkens slightly to conserve
Save1
power consumption.
The screen darkens more significantly to
Save2
conserve power consumption.
Backlight brightness adjusts according
to the ambient light of the room to
Auto
conserve power consumption.
NOTE
• When setting to "Auto", the OPC indicator lights up green,
senses the surrounding light and automatically adjusts
the backlight brightness. Make sure no object obstructs
the OPC sensor, which could affect its ability to sense
surrounding light.
DTV/DVD TOP
MENU
DTV/SAT
GUIDE
DTV/SAT
INFO
VCR REC
C D
VOL VOL
Setup
[Standard]
[Off]
Standard
Save1
Save2
Auto
Description
Power management
When set, the power will automatically shut down.
1
Press MENU and the PC MENU screen
displays.
2
Press c/d to select "Power control".
3
Press a/b to select "Power Management",
and then press SET/ENTER.
PC MENU
Power control
Power Save
Power Management
4
Press a/b to select "Mode1" or "Mode2",
and then press SET/ENTER.
PC MENU
Power control
Power Management
Selected item
• No power management
Off
• Factory preset value.
• If no signal inputs for 8 minutes, the power
shuts down.
• Even if you start using the PC and the signal
inputs again, the System stays off.
Mode1
• The System turns on again by pressing
POWER button on the Display or TV
POWER on the remote control unit. (See
page 20).
• If no signal inputs for 8 seconds, the power
shuts down.
Mode2
• When you start using the PC and the signal
inputs again, the System turns on.
Setup
[Standard]
[Off]
Off
Mode1
Mode2
Description
39