Sharp Aquos LC-30HV4U Operation Manual page 39

Basic adjustment settings
Power control (continued)
No signal off
When set to "Enable", the power will automatically shut
down if no signal inputs for 15 minutes.
MENU
RETURN
SOURCE
POWER
A
POWER INPUT
1
Press MENU and the TV MENU screen
displays.
2
Press c/d to select "Power control".
3 3
Press a/b to select "No Signal Off", and
then press SET/ENTER.
TV MENU
Power control
Power Save
No Signal Off
No Operation Off
4 4
Press c/d to select "Enable", and then
press SET/ENTER.
TV MENU
Power control
No Signal Off
Enable
• Five minutes before the power shuts down,
remaining time displays every minute.
NOTE
• "Disable" is factory preset value.
• When a TV program finishes, and the AVC System receives
signal input, this function may not operate.
38
TV/SAT/DVD DTV/DVD TOP
MENU MENU
DTV/SAT
GUIDE
SET/
ENTER
DTV/SAT
INFO
VCR REC
FAVORITE CH
B C D
VOL VOL
RECEIVER
Setup
[Standard]
[Disable]
[Disable]
Disable
No operation off
When set to "Enable", the power will automatically shut
down if there is no operation for 3 hours.
MENU TV/SAT/DVD
RETURN MENU
SOURCE
POWER
SET/
ENTER
FAVORITE CH
A B
POWER INPUT
RECEIVER
1
Press MENU and the TV MENU screen
displays.
2
Press c/d to select "Power control".
3
Press a/b to select "No Operation Off", and
then press SET/ENTER.
TV MENU
Power control
Power Save
No Signal Off
No Operation Off
4
Press c/d to select "Enable", and then
press SET/ENTER.
TV MENU
Power control
No Operation Off
Enable
• Five minutes before the power shuts down,
remaining time displays every minute.
NOTE
• "Disable" is factory preset value.
DTV/DVD TOP
MENU
DTV/SAT
GUIDE
DTV/SAT
INFO
VCR REC
C D
VOL VOL
Setup
[Standard]
[Disable]
[Disable]
Disable