Sharp Aquos LC-30HV4U Operation Manual page 61

Useful adjustment settings
1 2 3
4 5 6
7 8 9
0 100
Changing the secret number
Allows you to change your current secret number.
1
Repeat steps 1 to 3 in Setting a secret
number.
• Secret number setting menu displays.
2
Input the 4-digit secret number by using 0 –
9.
3
Press a/b to select "Secret No.", and then
press SET/ENTER.
4
Press a/b to select "New Secret No.", and
then press SET/ENTER.
5
Input the old 4-digit number you have set
using 0 – 9.
TV MENU
Setup
Parental CTRL
New Secret No.
Secret No. Clear
6
Input the new 4-digit number using 0 – 9.
TV MENU
Setup
Parental CTRL
New Secret No.
Secret No. Clear
7
Input the same 4-digit number on the
"Reconfirm" screen as in step 6 to confirm.
TV MENU
Setup
Parental CTRL
New Secret No.
Secret No. Clear
60
MENU TV/SAT/DVD DTV/DVD TOP
RETURN MENU
SOURCE
POWER
SET/
ENTER
VCR REC
FAVORITE CH
ENT A B C
POWER INPUT VOL
RECEIVER
Input Secret No. – – – –
New Secret No. – – – –
Reconfirm – – – –
Input Secret No. – – – –
New Secret No. – – – –
Reconfirm – – – –
Input Secret No. – – – –
New Secret No.
* * * *
Reconfirm – – – –
Clearing the secret number
MENU
Allows you to clear your secret number.
DTV/SAT
GUIDE
DTV/SAT
1
Repeat steps 1 to 3 in Setting a Secret
INFO
Number.
D
• Secret number setting menu displays.
VOL
2
Input the 4-digit secret number by using 0 –
9.
3
Press a/b to select "Secret No.", and then
press SET/ENTER.
4
Press a/b to select "Secret No. Clear", and
then press SET/ENTER.
5
Press c/d to select "Yes", and then press
SET/ENTER.
• Your secret number is cleared.
TV MENU
Parental CTRL
New Secret No.
Secret No. Clear
NOTE
• See page 59 for re-registering with a new secret number
after being cleared.
• As a precautionary measure, make a note of your
secret number and keep it in a familiar place. If you
lose or forget your secret number, initialize the
Liquid Crystal Television to return all settings except
for the TV channel settings to factory preset values.
(See page 82.)
• If the secret number is cleared the Status setting
automatically sets to "Off". "V-Chip" and "Status" will not
be selectable from the menu.
Setup
Yes No