Setting The System - Sharp Aquos LC-30HV4U Operation Manual

Preparation

Setting the System

After putting the Display and the AVC System in place, connect the system cables and AC cords. Use the
cable clamp for bundling the cables.
1
Removing the terminal cover
2
Connecting the system cable and the AC cord to the Display
3
Connecting the system cable and the AC cord to the AVC System
AVC System (rear view)
CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE
AC CORD CONNECTED.
Display (rear view)
(GRAY)
Connect the plug firmly
until the hooks on both
sides click.
Press down the two
upper hooks to remove
the cover toward you.
DISPLAY INPUT2 DISPLAY INPUT1
(WHITE)
Connect the plug into the
terminal and secure it by
tightening the thumb screws.
System cable
System cable
(GRAY) (WHITE)
AC cord
AC cord
9