Colour System Setting; Demo; Colour System - Sharp Aquos LC-26AF3X Operation Manual

Useful adjustment settings

Colour system setting

u can change the colour system to one that is
Yo
compatible with the image on the screen.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Option".
3
Press a/b to select "Colour System", and
then press ENTER.
4
Press a/b to select a compatible video
signal system of your equipment, and then
press ENTER.
NOTE
• Factory preset value is "AUTO".
• If "AUTO" is selected, colour system for each channel is
automatically set. If an image does not display clearly,
select another colour system (e.g. PAL, NTSC 4.43).
AUTO
PAL
SECAM
NTSC 3.58
NTSC 4.43
PAL-60

Demo

Demo shows some of the functions of the TV on the
screen.
The demonstration items are as follows.
• Setting Demo to "On" or "Off".
• Selecting input source to use for Demo. (Demo, Skip [TV,
INPUT1, INPUT2, INPUT3, INPUT4])
• Selecting Freeze setting for Demo. (On/Off)
• Selecting Menu setting for Demo. (On/Off)
• Selecting Interval setting for Demo. (10 Sec., 15 Sec., 30
Sec.)
NOTE
• The demo show can be activated from the option menu.
After switching on this demo function, it takes 70 seconds
approximately, before the TV-set starts the demo show.
The selected functions are shown in a self-repeating
sequence. Return to normal television-mode is possible
only by deactivating the demo-function.
37