Table of Contents
Advertisement
Installation (cont'd)
Q3-DV Arm Adjustment
Step 1. Ensure case is level. Check level at bulk-
head as shown. (Level 1)
Step 2. Unscrew and remove access covers.
Step 3. Loosen top and bottom hinge vertical ad-
justment screws.
Step 4. Place level on the top of case as shown
(Level 2)
Step 5. Using a 1/2" open-ended wrench, turn the
Turn-Buckle Connecting Rod until level 2 indicates
that the arm is level (Note: Some Turn-Buckles
may be reverse threaded.) Test turning direction
by observing the effect of turn direction.
LEVEL 2
TURN BUCKLE
4
CONNECTING ROD
2
ACCESS COVER
LEVEL 1
1
WRAPPER BULKHEAD
IMPORTANT! Preload the canopy arm to
minimize sag from product.
IMPORTANT! ATTEMPTING TO COMPEN-
SATE FOR POOR INSTALLATION PRACTIC-
ES BY MANIPULATING THE CANOPY HARD-
WARE WILL RESULT IN UNSATISFACTORY
WORKMANSHIP AND POSSIBLY CAUSE
HARDWARE FAILURE AND/OR INJURY.
two full rotations in the direction that raises th
H
12
2 complete
turns
Direction
of preloading
DETAIL H
Advertisement
Table of Contents
