Critical Dimensions And Measurements - Hussmann DSF Installation & Operation Manual

Critical Dimensions and Measurements

B
C
A
CALLOUT
A
B
C
D
E
F
G
Installation (Cont'd)
G
F
DESCRIPTION
Normal Distance from the ground to the bottom of
the hardware (Sampled at the ends)
Overall Hardware depth (Hardware fully closed)
Overall Distance from the ground to the highest
point on glass (Wings Up)
Normal Distance from Wing Channel to highest
point on glass (Wings Down)
Distance from the back of the end panel to the
fi rst hole in the Wing Channel
Distance from the front corner of the end wing to
the center of the glass stop
Distance from the outside edge of the plex wing
to the center hold of the glass stop
D
17
E
MODEL VALUE (Inches)
27-1/4 ~ 27-3/8
3-5/16 ~ 3-7/16
54-3/8 ~ 54-1/2
14-3/8 ~ 14-7/16
8 ~ 8-1/16
28 ~ 28-1/8
5/8 ~ 11/16