Table of Contents
Advertisement
Timer Operations
Timer Operations
The Timer function allows you to set a transmission and/or polling
operation to be performed automatically at a time you specify. One
transmission operation and one polling operation can be set at any one
time, and the times they will be performed can be specified up to 24
hours in advance.
As an example, you can use this function to take advantage of lower
nighttime telephone rates without having to be there when the
operation is performed.
Note: Only a Speed Dial number can be used to dial the receiving machine.
Setting a timer operation
1
Press the keys shown at right.
TIMER MODE will appear in the
display.
2
Press # to set a transmission operation
(SEND MODE), or
operation (POLLING MODE).
3
Press 1 to select SET.
4
Enter the time at which you want the
operation to take place (2 digits for the
hour and 2 digits for the minute).
*
5
Press the
key to select P.M.
6
Press the START/MEMORY key.
86
*
to set a polling
key to select A.M. or the #
FUNCTION
1
or
1
9
2
0
Example: 9:25
or
START/MEMORY
5
Advertisement
Table of Contents
