Reception And Copying Problems - Sharp UX-305 Operation Manual

Problems and Solutions
The power is on, but no
transmission takes place.
Nothing is printed at the
receiving end.
A distorted image is
received at the other end.

Reception and copying problems

Problem
The fax machine doesn't
receive documents
automatically.
The power is on, but no
reception takes place.
108
Make sure that the receiving machine has fax
paper.
Make sure that the telephone line cord is
plugged into the TEL. LINE jack, and not the
TEL. SET jack.
If the receiving machine is in manual mode with
no attendant, reception will not be possible.
If the receiving machine is not a Sharp model,
make sure it is G3 compatible.
Check the display for error messages.
Pick up the handset and check for a dial tone.
Make sure that the document for transmission is
placed face down in the feeder.
Noise on the telephone line may cause
distortion. Try sending the document again.
Make a copy of the document on your fax. If the
copy is also distorted, your fax may need
service.
Check and remedy
Make sure that the reception mode is set to FAX.
If you subscribe to a distinctive ring service,
make sure that the Distinctive Ring function is
set to the correct ring pattern. If you do not
subscribe to a distinctive ring service, make sure
that Distinctive Ring is set to OFF SETTING.
(See Distinctive Ring in Chapter 7.)
Make sure that the wall jack is connected to the
TEL. LINE jack, and not the TEL. SET jack.