Table of Contents
Advertisement
3
Press a number from 1 to 3 to select the ring pattern below that
matches your second number's ring pattern. Or, press 4 to have your
fax automatically answer your normal telephone number. Press 5 to
turn off the distinctive ring function.
1
RING PATTERN 1:
2
RING PATTERN 2:
3
RING PATTERN 3:
4
STANDARD RING: Your standard (normal) ring pattern.
5
OFF SETTING:
The display will show:
4
Press the STOP key.
5
Set the reception mode to FAX.
RECEPTION
When using distinctive ring, you must set the reception mode of your
fax to FAX. When your designated fax number is dialed, your fax will
automatically answer and begin reception after two rings. Note that
other devices on the same line will also ring until your fax answers. If
one of your other numbers is dialed, the fax will ring; however, it will
not answer.
Note: If you are using an answering machine with your distinctive ring
service, the answering machine must be connected to a separate wall jack.
Do not connect it directly to your fax.
Two short rings.
One short, one long, and one short ring.
Two short rings and one long ring.
Turn distinctive ring off.
FAX SIGNAL RX
STOP
MODE
Distinctive Ring
FAX
TEL
A.M.
71
Advertisement
Table of Contents
