Table of Contents
Advertisement
attachment to do the work of a larger industrial tool. There are certain
applications for which this tool was designed. It will do the job better and
more safely at the rate for which it was intended. Do not modify this tool and
do not use this tool for a purpose for which it was not intended.
Dress properly while working. Protect your skin from accidental abrasion
6.
burns by wearing long sleeves and safety gloves. Do not wear loose clothing
or jewelry as they can be caught in moving parts. Protective, electrically
nonconductive clothes and nonskid footwear are recommended when
working. Wear restrictive hair covering to contain long hair.
Use eye and ear protection. Always wear ANSI approved impact safety
7.
goggles, full face shield, and ear protection when using this tool. Wear an
ANSI approved dust mask or respirator when working around metal, wood, and
chemical dusts and mists.
Do not overreach. Keep proper footing and balance at all times. Do not
8.
reach over or across running machines.
Maintain tools with care. Keep tools clean and in good condition for better
9.
and safer performance. Follow instructions for lubricating and changing
accessories. Inspect tool fittings and hoses periodically and, if damaged,
have them repaired by an authorized technician. The handles must be kept
clean, dry, and free from oil and grease at all times.
10. Disconnect power. Disconnect from air pressure source when not in use.
11. Remove adjusting keys and wrenches. Check that keys and adjusting
wrenches are removed from the work surface before connecting it.
12. Avoid unintentional starting. Be sure the throttle lever is in the Off position
when not in use and before attaching to pressure source. Do not carry
any tool with your hand on the throttle lever, whether it is attached or not.
Disconnect the air hose from the tool when not in use.
13. Stay alert. Do not operate any tool when you are tired.
14. Check for damaged parts. Before using any tool, any part that appears
damaged should be carefully checked to determine that it will operate
properly and perform its intended function. Check for alignment and binding
of moving parts; any broken parts or mounting fixtures; and any other
condition that may affect proper operation. Any part that is damaged should
be properly repaired or replaced by a qualified technician. Do not use the
tool if the throttle lever does not function properly.
15. Guard against electric shock when working on electrical equipment,
such as your air compressor. Prevent body contact with grounded
surfaces such as pipes, radiators, ranges, and refrigerator enclosures.
SKU 93048
For technical questions and replacement parts, please call 1-800-444-3353
Page 3
Advertisement
Table of Contents
