Sharp FO-DC535 Network Manual page 33

3
Press the numeric keys and/or the letter keys to enter the old (currently
set) password.
•
If you are setting the password for the first time, enter "Sharp" (this is the
initial factory-set password).
•
Each character/digit that you enter will be displayed as "+".
4
When you have finished entering the
current password, press
•
If you entered the wrong password, WRONG PASSWORD will appear. Re-
enter the correct password. If you enter the wrong password 3 times in a
row, you will return to the date and time display.
5
Enter the new password.
•
The characters #, &, <, > cannot be used in the password.
6
START/
Press .
ENTER
7
To enable protection (require entry of the password) now, press
select YES and press
If you do not wish to enable protection yet (you can enable protection
later using the procedure on the following page), make sure that NO is
selected and press
•
The machine will print out the password for your records. Take care not to
forget the password or lose the print-out. In the event that you forget the
password and have kept no record, contact your dealer.
START/
.
ENTER
START/
.
ENTER
START/
.
ENTER
Administrator Password
ADMIN PASSWORD
[ ]
ENTER NEW PASSWORD
ADMIN PASSWORD
PASSWORD PROTECTION
1=YES
2=NO
to
31