Sharp FO-DC535 Network Manual page 206

Optional Settings
Setting 09: ERROR CORRECTION MODE (ECM)
Select YES to have any distortions in a transmission due to noise on the
telephone line corrected before print-out at the receiving end. This is only
effective when the other machine has ECM as well. Select NO to turn the
function off. Press
Note: If the transmission or reception is taking place in Super G3 mode, ECM
will operate regardless of the ECM setting.
♦
Initial setting: YES
Setting 10: AUTO COVER SHEET
Select YES to have the fax automatically generate a cover sheet and send it
as the last page of each transmission. Select NO to turn the function off.
Press
♦
Initial setting: NO
Setting 11: FAX SCANNING WIDTH
This setting selects the maximum scanning width. Press
select 10 inches or 8.3 inches, and then press
♦
Initial setting: 10 inches
Setting 12: COPY SCANNING
This setting is used to reduce copies slightly before printing to ensure that
data on the edges are not cut off. Press
automatic reduction, or 100% for no reduction, and then press
♦
Initial setting: 100%
Setting 13: COPY CUT-OFF
This setting determines how the machine will copy documents that are longer
than the printing paper. Select CONTINUE to have the remainder of the
document printed on a second page, or CUT-OFF to cut off (not print) the
remainder. Press
♦
Initial setting: CUT-OFF
204
or
or to make the selection and then press
or
to make the selection and then press
START/
ENTER
or
to make the selection, and then press
START/
.
ENTER
or
.
to select AUTO for
START/
.
ENTER
START/
.
ENTER
to
START/
.
ENTER