Sharp FO-DC535 Network Manual page 205

Setting 05: TRANSACTION REPORT PRINT SELECTION
This sets the condition for printing out a Transaction Report. Press
to select one of the following conditions, and then press
ERROR/TIMER/
MEMORY:
SEND ONLY
ALWAYS PRINTS
NEVER PRINTS
ERROR ONLY
♦
Initial setting: ERROR ONLY
Setting 06: RECALL TIMES
This sets the maximum number of times your fax will automatically redial if the
line is busy. Enter any number from
♦
Initial setting: 02
Setting 07: RECALL INTERVAL
This sets the amount of time your fax will wait between automatic redials
when the line is busy. Enter
up to a maximum of 15 minutes.
♦
Initial setting: 05
Setting 08: SECURITY SELECTION
Select ON to turn polling security on, or OFF to turn it off. Press
to make the selection and then press
♦
Initial setting: ON
A report will be printed after an error, timer
operation, or memory operation
A report will be printed only after a
transmission
A report will be printed after each
transmission, reception, or error
A report will never be printed.
A report will be printed only after an error
occurs
to
0 0
for 1 minute,
0 1
START/
.
ENTER
Optional Settings
START/
ENTER
.
1 4
for 2 minutes, etc.,
0 2
or
or
203