G Reversing Single Pass Feeder; Storage Of Supplies; G Proper Storage; Specifications - Sharp AR-M236 Copier Manual

PERIPHERAL DEVICES AND SUPPLIES
REVERSING SINGLE PASS FEEDER
The reversing single pass feeder (RSPF) can automatically feed multi-page documents.
If the RSPF is installed, two-sided originals can be copied automatically without having to manually turn them over.
Part names
Document feeder tray

Specifications

Acceptable originals
Power supply
Detectable original sizes
Weight
Dimensions
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification
Note
changes for product improvement without prior notice. The performance specification figures indicated are
nominal values of production units and there may be some deviations from these values in individual units.

STORAGE OF SUPPLIES

Standard supplies for this product that are to be replaced by the user are paper and the toner cartridge.
For best copying results, be sure to use only SHARP products. Only genuine SHARP consumables carry the
Genuine Supplies label.
GENUINE SUPPLIES
PROPER STORAGE
Store the supplies in a location that is:
• clean and dry,
• at a stable temperature,
• not exposed to direct sunlight.
78
Original guides
Document feeder
cover
Reversing tray
Exit area
AR-RP7
2
35 g/m to 128 g/m
Weight
2
(52 g/m to 105 g/m
Size A5 to A3 (5-1/2" x 8-1/2" to 11" x 17")
Capacity Up to 100 sheets (Thickness 13 mm (33/64) and below)
Drawn from the machine
A5, A4, A4R, B4, A3
(5-1/2" x 8-1/2", 5-1/2" x 8-1/2"R, 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14",
11" x 17")
Approx. 7.5 kg (16.6 lbs.)
586 mm (W) x 457 mm (D) x 145 mm (H)
(22-61/64" (W) x 17-9/64" (D) x 5-1/4" (H))
Document transport cover
Document transport cover knob
2
(9 lbs. to 34 lbs. )
2
(14 lbs. to 28 lbs.) for two-sided original)
Store paper in the wrapper and lying flat.
Paper stored out of the wrapper or in packages
standing on end may curl or get damp, resulting in
paper misfeeds.