Sharp AR-M236 Copier Manual page 35

4
Touch the [X] key.
100
X
100
Y
ZOOM
5
Use the reduction, enlargement, and
[ZOOM] keys (
copy ratio in the horizontal (X)
direction.
64%
50%
XY ZOOM
4% 100
Y
ZOOM
0%
CANCEL
XY ZOOM
Touch a reduction or enlargement key to set
Note
the approximate ratio, then touch the [
key to decrease the ratio or the [
increase the ratio.
6
Touch the [Y] key.
50
X
100
Y
ZOOM
The [X] key is selected
1
(highlighted) by default,
so there is normally no
2 need to perform this step
(Go to step 5.).
If the [X] key is not
4
highlighted, perform this
step.
/ ) to change the
A fixed ratio key will not
become highlighted
Y
when touched.
The [ZOOM] keys
( / ) can be used to
change the ratio in
increments of 1%
Touch the key to
increase the ratio, or the
key to decrease the
ratio. Continuing to touch
a [ZOOM] key ( /
makes the ratio change
faster.
] key to
7
Use the reduction, enlargement, and
[ZOOM] keys (
copy ratio in the vertical (Y) direction.
70%
64%
50%
X
Y
ZOOM
CANCEL
ZOOM
8
Touch the [OK] key.
OK
141%
%
%
200%
100%
400%
9
Make sure that a suitable paper size is
automatically selected, or select
)
another size using the [PAPER
SELECT] key.
EXPOSURE
]
AUTO A4
PAPER SELECT
X-50% Y-70%
10
Select the number of copies and any
other desired copy settings, and then
press the [START] key (
To cancel this function, touch the [CANCEL]
Note
key in the XY ZOOM screen.
COPY FUNCTIONS
/ ) to change the
A fixed ratio key will not
become highlighted
X
when touched.
Y
50
If you need to readjust
the horizontal ratio, touch
70
the [X] key again.
EX
AUT
PAPE
If AUTO PAPER
SELECT is enabled, the
appropriate copy paper
size is automatically
selected based on the
original size and selected
copy ratios.
).
2
33