Sharp AR-M236 Copier Manual page 40

CONVENIENT COPY FUNCTIONS
1
Place the original(s). (p.22, p.23)
2
Touch the [OUTPUT] key.
2-SIDED COPY
OUTPUT
3
Touch the [STAPLE SORT] key.
OUTPUT
TOP TRAY
SORT
STAPLE
SORT
OFFSET
GROUP
TRAY
4
Touch the [OK] key.
OK
CENTRE TRAY
OFFSET
5
Select the number of copies and other
copy settings, and then press the
[START] key (
38
When the [STAPLE
SORT] key is selected,
the offset tray is
automatically selected as
the output tray. The top
tray and centre tray
cannot be used.
).
6
[When using the RSPF:]
Copying will start after all originals have been
scanned.
[When using the document glass:]
Replace the original with the next original and
press the [START] key (
until all originals have been scanned, and then
touch the [READ-END] key.
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
If the memory becomes full while scanning the
originals, "MEMORY IS FULL. PRESS [START] TO
BEGIN COPYING OR [CA] TO CANCEL." will appear.
To copy only the originals that have been scanned,
press the [START] key (
the [CLEAR ALL] key (
The number of originals that can be scanned
Note
into memory can be increased by increasing
the memory allocation in the key operator
programs, or by installing more memory.
(See the "Key operator's guide".)
). Repeat this step
READ-END
). To cancel the job, press
).