Reversing Single Pass Feeder; Storage Of Supplies; Proper Storage - Sharp MX-M260 Operation Manual

PERIPHERAL DEVICES AND SUPPLIES

REVERSING SINGLE PASS FEEDER

The reversing single pass feeder (RSPF) can automatically feed multi-page documents.
If the RSPF is installed, two-sided originals can be copied automatically without having to manually turn them over.
Part names
Document feeder tray
Specifications
Acceptable originals
Power supply
Detectable original sizes
Weight
Dimensions
* When paper weight is 90
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification
Note
changes for product improvement without prior notice. The performance specification figures indicated are
nominal values of production units and there may be some deviations from these values in individual units.

STORAGE OF SUPPLIES

Standard supplies for this product that are to be replaced by the user are paper and the toner cartridge.
For best copying results, be sure to use only SHARP products. Only genuine SHARP consumables carry
the Genuine Supplies label.
GENUINE SUPPLIES

PROPER STORAGE

Store the supplies in a location that is:
• clean and dry,
• at a stable temperature,
• not exposed to direct sunlight.
Supply and Consumables
The supply of spare parts for a repair of the appliance is guaranteed for at least 7 years following the termination
of production. Spare parts are those parts of the apparatus which may break down within the scope of the ordinary
use of the product - whereas those parts which normally exceed the life of the product are not to be considered as
spare parts. Consumables too, are available for 7 years following the termination of production.
142
Original guides
Document feeder
cover
Reversing tray
Exit area
MX-RP10
35 g/m
2
Weight
(52 g/m
2
Size A5 to A3 (5-1/2" x 8-1/2" to 11" x 17")
Capacity Up to 100 sheets* (Thickness 13 mm (33/64) and below)
Drawn from the machine
A5 to A3 (5-1/2" x 8-1/2" to 11" x 17")
Approx. 7.4 kg (16.4 lbs.)
586 mm (W) x 495 mm (D) x 187 mm (H)
(22-1/16" (W) x 19-31/64" (D) x 7-23/64" (H))
g
2
/m (24 lbs.).
to 128 g/m
2
(9 lbs. to 34 lbs. )
to 105 g/m
2
(14 lbs. to 28 lbs.) for two-sided original)
Store paper in the wrapper and lying flat.
Paper stored out of the wrapper or in packages
standing on end may curl or get damp, resulting in
paper misfeeds.
Document transport cover
Document transport cover knob