Setting The Date And Time - Sharp AR-208D Operation Manual

INITIAL SETTINGS
8
Press the [ENTER] key.

SETTING THE DATE AND TIME

The date and time that appear in the display are printed at the top of each page you transmit. Set the date and time
by pressing the keys on the operation panel as shown below.
If you enter an incorrect number, press the [CLEAR] key (
The time can be displayed in 12-hour or 24-hour format. "Month/Day/Year", "Day/Month/Year" or "Year/Month/Day"
can be selected for the order of display of the date.
Use the following procedure to set the date and time:
1
Press the [MENU] key.
2
Press the [ ] key (
until "2:ENTRY MODE" appears, and
then press the [ENTER] key.
Selection
"2:ENTRY MODE"
3
Press the [ ] key (
until "2:DATE&TIME SET" appears,
and then press the [ENTER] key.
Selection
"2:DATE&TIME SET"
4
Enter the year, month, and day with
the numeric keys and then press the
[ENTER] key.
5
Enter the time with the numeric keys.
22
) or [ ] key ( )
) or [ ] key ( )
9
Press the [MENU] key.
) and re-enter the number.
6
Press the [ ] key (
to select "AM" or "PM".
7
Press the [ENTER] key.
8
Press the [MENU] key.
Press the [MENU] key to
exit.
) or [ ] key (
When 24-hour format is
selected, do not perform
this step.
Press the [MENU] key to
exit.
)