A Look At The Fax Operation Panel - Sharp AR-208D Operation Manual

A LOOK AT THE FAX OPERATION PANEL

Rapid keys
1
Press one of these keys to dial a fax or telephone
number automatically.
[MEMORY] key / indicator
2
Used for sending faxes in memory (indicator is lit)
or direct sending (indicator is not lit).
[SPEED/SEARCH] key
3
Press this key to dial a two digit Speed Dial
number.
During character inputting, use this key to delete
an incorrect entry.
Also, press this key twice to search for an
automatic dialing number.
[BROADCAST] key
4
Press this key to send originals to a group of
receiving fax machines.
[RECEPTION MODE] key
5
Press this key to select the mode of reception.
[REDIAL/PAUSE] key
6
Press this key to automatically redial the last
number you dialed.
Also, press this key to insert a pause when
entering numbers.
[COVERSHEET] key
7
Press this key to automatically add a cover sheet
and message to a fax.
14
2 3
1 4 5 6 7 8 9 10
13 14 15
[RESOLUTION] key
8
Press this key to adjust the resolution before
sending faxes.
[CONTRAST] key
9
Press this key to adjust the contrast before sending
faxes.
[REPORT] key
10
Press this key to print out a report of a fax
transaction and also when receiving a confidential
fax.
Display
11
Shows various messages during fax operation and
programming.
[CLEAR] key (
12
Press this key to stop an operation before it is
completed, or to delete the number that was last
input.
When a setting menu appears, use this key to
move back to the previous menu level.
[SHIFT] key / indicator
13
Press this key to switch between upper and lower
case.
[2-SIDED TX] key
14
Press this key to fax a two-sided original.
16 17 18
)
19 20