Sharp AL-1655CS Operation Manual page 96

APPENDIX
Fusing system
Developer system
Light source
Resolution
Gradation
Power supply
Power consumption Max. 1.0 kW
Overall dimensions
(with bypass tray
folded)
2
Weight*
Dimensions
Operating
conditions
Noise level
Emission
concentration
(measured
according to RAL-
UZ62: Edition Jan.
2002)
1
* The copy time in the case when the power is turned on and copying using the
document glass is started immediately after the power save indicator goes off (A4,
paper fed from paper tray).
The first-copy time and warm-up time may vary depending on machine operating
conditions and ambient conditions such as temperature.
2
* Not including TD and drum cartridges.
94
Heat rollers
Magnetic brush development
Tri-color CCD light source (CCD: 3 components; R, G, and B)
Scan: 600 x 300 dpi Output: 600 x 600 dpi(AUTO/TEXT mode)
Scan: 600 x 600 dpi Output: 600 x 600 dpi(PHOTO mode)
Scanning: 256 Printing: 2 value
AC 120V, 60 Hz, 8A
20.4" (W) x 19.8" (D) (518 mm (W) x 503 mm (D))
Approx. 50.7 lbs. (23 kg)
20.4" (W) x 19.8" (D) x 18.5" (H)
(518 mm (W) x 503 mm (D) x 468 mm (H))
°
Temperature: 50 F to 86
to 85%
Sound Power Level Lw
Copying: 6.0[B]
Standby: 3.2[B]
Sound Pressure Level Lp
Copying: 46[dB(A)]
Standby: 17[dB(A)]
Sound Pressure Level Lp
Copying: 48[dB(A)]
Standby: 18[dB(A)]
Noise emission measurement in accordance with ISO 7779.
Ozone: 0.02 mg/m
Dust: 0.075 mg/m
Styrene: 0.07 mg/m
° ° °
F (10 C to 30
(1B=10dB)
A
(bystander positions)
A
(operator position)
A
3
or less
3
or less
3
or less
C), Humidity: 20%