Creating Margins When Copying (Margin Shift) - Sharp AL-1655CS Operation Manual

CREATING MARGINS WHEN COPYING
The margin shift function is used to automatically shift the text or image or the copy
paper approximately 1/2".
As shown below, LONG EDGE or SHORT EDGE can be selected.
Document glass
Note
1
Place the original(s).
2
Press the [E-SORT/SP.FUN] key until
"MARGIN SHIFT" appears and then press
the [ENTER] key.
38
AB
RSPF
B A
Original
• This feature cannot be used with the 2 IN 1 feature.
• The margin width can be changed with "MARGIN WIDTH" in the user
programs. (p.66)
• Note that a margin is created by shifting the image, and thus if the
image is shifted too far, the edge of the image may be cut off.
SHORT EDGE
AB
Margin
Copy
(Margin shift)
LONG EDGE
AB
Margin
SPECIAL FUNCTION
MARGIN SHIFT