Sharp AL-1655CS Operation Manual page 68

USER SETTINGS
Program
number
9
10
11
12
13
14
15
66
Program name
AE/TEXT
RESOLUTION
2-SIDED COPY
MODE
MARGIN WIDTH
MEM. FOR
PRINTER
AUTO KEY
REPEAT
KEY PRESS TIME
KEY TOUCH
SOUND
Setting codes
(factory default
setting appears
in bold)
• This setting is used to change
1: 300dpi
2: 600dpi
• If the memory fills up when
1: HI-SPEED
2: NORMAL
1: 1/4"
• Use this setting to set the
2: 1/2"
3: 3/4"
4: 1"
1: 30%
• Use this to change the
2: 40%
3: 50%
4: 60%
5: 70%
• Use this setting to select
1: ON
2: OFF
• Use this setting to select how
1: NORMAL
2: 0.5 SEC.
3: 1.0 SEC.
4: 1.5 SEC.
5: 2.0 SEC.
1: LOW
• This sets the volume of beep
2: HIGH
3: OFF
Explanation
the copy resolution in AUTO
and TEXT mode from 600 x
300 dpi to 600 x 600 dpi (high-
quality mode). Scanning is
slower when high-quality
mode is used.
two-sided copying is
performed, "NORMAL" can be
selected to make copying
possible. However,
"NORMAL" results in a slower
copying speed. Normally "HI-
SPEED" is selected to enable
fast two-sided copying.
margin width.
proportion of machine
memory used for printer
mode.
whether or not holding down a
key causes repeated input of
the key. For keys that
normally cause a set value to
decrease or increase when
held down (for example, the
[ ] key ( ) or [
( )), this program can be
used to have the set value not
change when the key is held
down.
long a key must be pressed
for the input to be accepted.
By selecting a longer time,
you can prevent settings from
being changed by the
accidental pressing of a key.
signals. (p.70)
] key