Sharp AL-1655CS Operation Manual page 51

9
The printer or printers
connected to the network
will be detected. Click the
printer to be configured
(the machine) and click
the "Next" button.
• The "Ethernet Address" is indicated on the left side of the machine
Note
near the LAN connector.
• If the machine is used on a different network after the IP address is
set, the machine will not be recognized. Enter the Ethernet Address
and click the "Initialize" button to initialize the IP address. Follow the
on-screen instructions to click the "OK" button and then the "Search"
button.
10
Enter the IP address,
subnet mask, and default
gateway.
The settings in the above
window are examples.
Be sure to ask your network
administrator for the correct IP
address, subnet mask, and
default gateway to be entered.
When "Get IP Address Automatically" is selected, the IP address may
Note
at times change automatically. This will prevent printing. In this event,
select "Assign IP Address" and enter the IP address.
11
Click the "Next" button.
SET UP THE SOFTWARE
5
49